TICAM1 Industrial Infrared Thermal Imaging Camera with 200MP Visible Light Lens Thermometer Temperature Detect Floor Heating
326
Malipo Salama Yanahakikishiwa

Rudisha bidhaa zitakubaliwa ndani ya siku 40 tangu tarehe ya kupokea bidhaa. Bidhaa zilizobuniwa haziwezi kurudishwa au kubadilishwa. Bidhaa zilizonunuliwa na kadi ya zawadi ya elektroniki zinaweza kubadilishwa tu; rudi pesa haifai.
Zawadi ya Bure
Karibu Roymall, tovuti yako ya kitaalamu ya kununua zawadi za hifadhi ya duka. Tunathamini na kushukuru msaada wako, na tunataka kuonyesha shukrani yetu kwa kuongeza kipengele cha msisimko wa ziada kwa ununuzi wako. Unaponunua nasi, sio tu utapata bidhaa za hali ya juu zinazoboresha maisha yako, lakini utapata pia zawadi ya bure ya kipekee kwa kila agizo lako. Tayari kuchunguza mkusanyiko wetu na kupata zawadi zako kamili? Chunguza uteuzi wetu wa bidhaa za hifadhi ya duka, weka agizo lako na subiri msisimko wa zawadi yako ya bure kufika pamoja na ununuzi wako.Sera ya Usafirishaji
Tutafanya kazi kwa bidii kukufikishia bidhaa baada ya kupokea maagizo yako na kuhakikisha zinafika salama. Maelezo ya uwasilishaji yatakuwemo kwenye barua pepe yako ya uthibitisho.Kwa hali ya kawaida, maagizo huchakatwa ndani ya siku 2. Katika hali maalum, yanaweza kucheleweshwa kama ifuatavyo: Unapoagiza Jumamosi, Jumapili au siku za likizo, itacheleweshwa kwa siku 2.Kwa kawaida, inahitaji siku 5-7 za kazi (Jumatatu hadi Ijumaa) bila kuathiriwa na ucheleweshaji wa ndege au mazingira mengine.Kwa sababu huduma yetu ya usafirishaji ni kimataifa, muda wa uwasilishaji utategemea eneo lako, kwa hivyo inaweza kuchukua muda na tafadhali subiri kwa subira ikiwa uko katika wilaya au nchi za mbali.1. Sera ya Kurudisha na Kubadilisha
Tunakubali tu bidhaa zilizonunuliwa kutoka roymall.com. Ikiwa unanunua kutoka kwa wasambazaji wetu wa ndani au wauzaji wengine, huwezi kuzirudisha kwetu. Bidhaa za mauzo ya mwisho au zawadi za bure hazikubaliki kwa kurudisha.Ili kuwa na haki ya kurudisha, bidhaa yako lazima isitumike na iwe katika hali ileile uliyoipeleka. Pia lazima iwe kwenye pakiti ya asili.Baada ya kupokea maagizo ya kurudisha kutoka kwetu, tafadhali pakiti bidhaa zako zilizorudishwa na kuacha kifurushi chako kwenye ofisi ya posta ya ndani au mtoa huduma mwingine wa usafirishaji.Tutachakata bidhaa yako ya kurudisha au kubadilisha ndani ya siku 3-5 za kazi baada ya kuipokea. Rudi pesa itachakatwa na kuwekwa kiotomatiki kwenye njia yako ya awali ya malipo.Hakuna kurudisha au kubadilisha kunaweza kukubaliwa ikiwa bidhaa ilitengenezwa kwa maagizo maalum, ikiwa ni pamoja na saizi maalum, rangi maalum au uchapishaji maalum.Ikiwa unahitaji msaada zaidi, tafadhali wasiliana nasi. service@roymall.com au Whatsapp: +8619359849471
2. Sera ya Kurudisha Pesa
Utapata rudi pesa kamili au stoo 100% ya stoo baada ya kupokea na kukagua kifurushi kilichorudishwa. Rudi pesa itachakatwa kiotomatiki kwenye njia yako ya awali ya malipo.Tafadhali kumbuka kuwa gharama za usafirishaji na ushuru wowote au ada hazirudishiwi. Gharama za ziada za usafirishaji hazirudishiwi mara tu kifurushi kimetumwa. Wewe ndiye mwenye jukumu la kulipa ada hizi na hatuwezi kuziacha au kuzirudisha, hata kama agizo litarudishwa kwetu.Mara tu tutakapopokea na kuthibitisha bidhaa yako iliyorudishwa, tutakutumia barua pepe kukujulisha kuwa tumepokea bidhaa yako. Pia tutakujulisha kuhusu uthibitisho au kukataliwa kwa rudi pesa yako.Ikiwa una shida yoyote kuhusu mchakato wa kurudisha pesa, tafadhali wasiliana nasi. service@roymall.com au Whatsapp: +8619359849471
Features:
1. Build in a visible light camera with 200MP pixels. In Infrared refer/merger modes, the resolution used is 320x240.
When using the WIFI function to connect to the computer and view the screen on the computer, users can choose different resolutions from the menu, with a maximum support of 200MP. At this time, this device even can be used as a security monitoring camera.
2. Support the Dual Light (thermal imaging and visible light) Fusion Mode to clearly capture each hotspot.(Merger mode)
3. Built in bright LED light, long press the wheel to turn on the flashlight;
4. Support four display modes: Infrared only, camera only, Infrared refer, and Merger;
5. Supports 5 color palettes, Iron oxide red, Rainbow, White Heat, Blue Orange, and Blue Yellow modes;
6. Emissivity can be adjusted to meet the temperature measurement of different materials;
7. Support image shooting, local storage, browsing, and viewing through a data cable connected to a computer;
8. In Merger mode, the positions of thermal imaging images and visible light images can be corrected;
9. Support WIFI AP network distribution function, connect to computers or mobile phone through WiFi network, and view local images through computers/mobile devices;
10. You can also view real-time video images through WiFi to achieve real-time monitoring;
11. Support firmware upgrades;
12. Other professional functions: filtering order settings, image display algorithm settings, etc.
13. Equipped with a built-in 1200mAH battery, it can be used for more than 4 hours when the screen is constantly on. If accessed through the network, the screen will automatically shut down to save power
14. 2.4-inch TFT high-definition display screen with a resolution of 320x240
15. Automatically capture the highest and lowest temperatures, as well as the center temperature.
Advantageuff1a
TICAM1 is a dual lens thermal imager with thermal imaging sensors and visible light cameras.
Supports 4 display modes: only infrared, only camera, camera refer, and merger mode(fusion mode);
Supports 6 color palettes; Supports image saving and USB flash drive functionality.
Supports WiFi connection, allowing users to browse infrared and visible light camera videos and save screenshots within the local area network through a web browser.
The fusion mode is also called Dual Light (thermal imaging and visible light) Fusion mode. In this mode, the hot spots can be clearly seen.
The thermal imaging camera can be widely used in equipment maintenance, floor heating maintenance and other occasions.
Specification:
Net weight: 75g
Volume: 75 x 51 x 27mm
Infrared resolution: 32 x 32
Infrared FOV: 33 u00b0 x 33 u00b0
Visible light lens: 200MP, supports up to UXGA (1632x1232)
Interface: Type-C
Storage capacity: 1.5M Byte, capable of storing over 50 JPEG format screenshots
Maximum frame count: 5.3FPS
Number of color palettes: 5 types
Temperature measurement accuracy: u00b1 3 u2103
Temperature measurement range: -20~1000 u2103
Working temperature: 15-45 u2103
Storage temperature: 0-60 u2103
Package included:
1 x Thermal imaging camera
1. Build in a visible light camera with 200MP pixels. In Infrared refer/merger modes, the resolution used is 320x240.
When using the WIFI function to connect to the computer and view the screen on the computer, users can choose different resolutions from the menu, with a maximum support of 200MP. At this time, this device even can be used as a security monitoring camera.
2. Support the Dual Light (thermal imaging and visible light) Fusion Mode to clearly capture each hotspot.(Merger mode)
3. Built in bright LED light, long press the wheel to turn on the flashlight;
4. Support four display modes: Infrared only, camera only, Infrared refer, and Merger;
5. Supports 5 color palettes, Iron oxide red, Rainbow, White Heat, Blue Orange, and Blue Yellow modes;
6. Emissivity can be adjusted to meet the temperature measurement of different materials;
7. Support image shooting, local storage, browsing, and viewing through a data cable connected to a computer;
8. In Merger mode, the positions of thermal imaging images and visible light images can be corrected;
9. Support WIFI AP network distribution function, connect to computers or mobile phone through WiFi network, and view local images through computers/mobile devices;
10. You can also view real-time video images through WiFi to achieve real-time monitoring;
11. Support firmware upgrades;
12. Other professional functions: filtering order settings, image display algorithm settings, etc.
13. Equipped with a built-in 1200mAH battery, it can be used for more than 4 hours when the screen is constantly on. If accessed through the network, the screen will automatically shut down to save power
14. 2.4-inch TFT high-definition display screen with a resolution of 320x240
15. Automatically capture the highest and lowest temperatures, as well as the center temperature.
Advantageuff1a
TICAM1 is a dual lens thermal imager with thermal imaging sensors and visible light cameras.
Supports 4 display modes: only infrared, only camera, camera refer, and merger mode(fusion mode);
Supports 6 color palettes; Supports image saving and USB flash drive functionality.
Supports WiFi connection, allowing users to browse infrared and visible light camera videos and save screenshots within the local area network through a web browser.
The fusion mode is also called Dual Light (thermal imaging and visible light) Fusion mode. In this mode, the hot spots can be clearly seen.
The thermal imaging camera can be widely used in equipment maintenance, floor heating maintenance and other occasions.
Specification:
Net weight: 75g
Volume: 75 x 51 x 27mm
Infrared resolution: 32 x 32
Infrared FOV: 33 u00b0 x 33 u00b0
Visible light lens: 200MP, supports up to UXGA (1632x1232)
Interface: Type-C
Storage capacity: 1.5M Byte, capable of storing over 50 JPEG format screenshots
Maximum frame count: 5.3FPS
Number of color palettes: 5 types
Temperature measurement accuracy: u00b1 3 u2103
Temperature measurement range: -20~1000 u2103
Working temperature: 15-45 u2103
Storage temperature: 0-60 u2103
Package included:
1 x Thermal imaging camera
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking